Configuring Sustworks IPNetRouter

1. In IPNetRouter, click the "Window" menu and then "Port Mapping". A window appears:

2. Under where it says "Configure Entry", click the menu to choose either TCP or UDP, depending on what the documentation for the program you are trying to run says. Usually it is TCP.

3. In the next box, type your public IP address. This is the address that people on the internet see you as coming from. It is assigned by your ISP.

4. In the next box, type the port number of the program you are trying to run (10700 for KDX Server, or 10200 for NetFone, unless you changed it).

5. In the next box, type the LAN address of the computer running the program. It will look something like "192.168.0.1".

6. In the next box, type the port number again, as above.

7. Leave the next box with "0".

8. Leave the tick ON for "Perm." and OFF for "Static".

9. Click the "Add" button. A new item should be added to the list, similar to the above screenshot.

Back to the Routers page.